Airsoft Ohio Forums  
  #1  
Old 05-19-2012, 12:34 PM
SixEyes's Avatar
SixEyes SixEyes is offline
Registered User
 
Join Date: Nov 2011
Location: Canton, Ohio
Posts: 7
SixEyes is a Private
iTrader: (0)
Custom TM G3A3, SUPER RARE!!

Ok, i would like to sell my Custom Tokyo Marui G3A3. I will start with what has been done to the gun.

External: It has a full steel metal body kit installed, as well as real wood furniture, taken off of a real german G3, and modified to fit for airsoft. Because the wood wasn't designed for airsoft use, the rear handguard is and needs to be secured with some sort of adhesive, i currently have tape on the inside of the handguard. It offers a very strong hold and you can't even tell it is there, maybe someone else can figure out a better way to hold it on.

Internal: The parts of this gun that aren't stock TM are better. It has a mix of JG, Guarder and TM parts in it's gearbox (JG enhanced parts are very strong, and should last just as long as TM stuff), a very strong JG high torque motor, and a stiffer spring that as it shooting 390 FPS with good compression. Most off this gun's stock parts have been replaced because of how old it is, but as i said it is now performing much better than it did stock. All of the repairs and replacements have been professionally done by War Den Airsoft Gun Worx (War Den airsoft's tech shop). This gun is in fully functional, and i recently used it at Operation SU2 where it performed very well.

With the gun, i will include the original TM box and manual. 3 metal 70 rd TM midcaps, 1 plastic high cap, 4 plastic KA 120 rd mids, all worth over $120 to buy new. a genuine leather german army issue sling, (the only one i have found that will fit on the gun) and a metal RIS scope mount. All mags fit well and feed flawlessly.

I also have a green plastic furniture set from a JG G3 at war den airsoft that i need to pick up. It is yours if we meet there or i get it from there before we meet. Also, i still have the original plastic TM furniture, but it has a custom camo paintjob from the previous owner, and the screw holes are stripped out on the stock.

Because of braces inside of the real G3 stock, the gun can only fit stick or maybe nunchuck type batteries. The gun is lipo ready (i used a 7.4 lipo a SU2) and has been wired to micro deans. No battery will be included. I am asking $300 for all. PM me if you are interested or for any questions. Overall, this gun has easily over $600 put into it. I will not ship, but i can meet at BTT or War Den airsoft, or maybe somewhere else if it is near the Akron/ Canton area.

As far as performance, this gun has the best range and accuracy with .25 gram BBs. Has a good ROF with an 8.4, and you can accurately pick off targets at long distance with ease. It has been battle tested, and is a great DMR.
*PICS ARE NOW ATTACHED!

Edit: I am now including a new intellect 8.4v 1600 mah NIMH stick battery, just got it and tested it. It works very well and will last you all day. the gun and battery have been rewired to large type connectors.
Attached Thumbnails
Click image for larger version

Name:	IMG_4104.jpg
Views:	251
Size:	37.0 KB
ID:	5997   Click image for larger version

Name:	IMG_4108.jpg
Views:	339
Size:	26.1 KB
ID:	5998  
__________________
Op Risk Factor; Rebel
Op SU2; U.S. forces, Squad Leader
Op RF2, Coalition, Squad Leader
Op Tribulation, Squad Leader
Op Explosive Sunset, Platoon Leader
Op RF3, Coalition, Squad leader

Last edited by SixEyes; 06-03-2012 at 10:16 PM. Reason: re-formatted
Reply With Quote
  #2  
Old 05-21-2012, 02:23 PM
SixEyes's Avatar
SixEyes SixEyes is offline
Registered User
 
Join Date: Nov 2011
Location: Canton, Ohio
Posts: 7
SixEyes is a Private
iTrader: (0)
Bump, also willing to negotiate price a bit although no low balling. i put a lot of cash into this gun. i can also take pics on request.
__________________
Op Risk Factor; Rebel
Op SU2; U.S. forces, Squad Leader
Op RF2, Coalition, Squad Leader
Op Tribulation, Squad Leader
Op Explosive Sunset, Platoon Leader
Op RF3, Coalition, Squad leader
Reply With Quote
  #3  
Old 05-27-2012, 01:03 PM
SixEyes's Avatar
SixEyes SixEyes is offline
Registered User
 
Join Date: Nov 2011
Location: Canton, Ohio
Posts: 7
SixEyes is a Private
iTrader: (0)
Bump, anyone want?
__________________
Op Risk Factor; Rebel
Op SU2; U.S. forces, Squad Leader
Op RF2, Coalition, Squad Leader
Op Tribulation, Squad Leader
Op Explosive Sunset, Platoon Leader
Op RF3, Coalition, Squad leader
Reply With Quote
  #4  
Old 05-30-2012, 03:19 PM
SixEyes's Avatar
SixEyes SixEyes is offline
Registered User
 
Join Date: Nov 2011
Location: Canton, Ohio
Posts: 7
SixEyes is a Private
iTrader: (0)
Bump, pics are now attached! Bask in it's glory!
__________________
Op Risk Factor; Rebel
Op SU2; U.S. forces, Squad Leader
Op RF2, Coalition, Squad Leader
Op Tribulation, Squad Leader
Op Explosive Sunset, Platoon Leader
Op RF3, Coalition, Squad leader
Reply With Quote
  #5  
Old 06-03-2012, 10:17 PM
SixEyes's Avatar
SixEyes SixEyes is offline
Registered User
 
Join Date: Nov 2011
Location: Canton, Ohio
Posts: 7
SixEyes is a Private
iTrader: (0)
Bump, this is a great deal, i want this sold ASAP!
__________________
Op Risk Factor; Rebel
Op SU2; U.S. forces, Squad Leader
Op RF2, Coalition, Squad Leader
Op Tribulation, Squad Leader
Op Explosive Sunset, Platoon Leader
Op RF3, Coalition, Squad leader
Reply With Quote
  #6  
Old 06-04-2012, 12:19 AM
Gravedust Gravedust is offline
Registered User
 
Join Date: Jul 2009
Posts: 233
Gravedust is a Private
iTrader: (1)
Not to be a ****, but that's Spanish CETME-C wood, not German G3. It would also be nice if you had a parts list so we knew exactly who makes what parts, instead of your generalizing of "whatever's not TM is JGetcetc." It's a pretty gun, reminds me of my old one, but we need more (accurate) information if anyone's gonna buy it.
Reply With Quote
  #7  
Old 06-04-2012, 03:14 PM
SixEyes's Avatar
SixEyes SixEyes is offline
Registered User
 
Join Date: Nov 2011
Location: Canton, Ohio
Posts: 7
SixEyes is a Private
iTrader: (0)
I would if i could tell you. War den never gave me a full list of parts that they put in the gun, and i'm not a tech. makes me kind of bummed. If i find out, i will be happy to add them to the post. And the wood on this gun is from a G3A3, not a CETME. they look VERY similar, but there are differences.
__________________
Op Risk Factor; Rebel
Op SU2; U.S. forces, Squad Leader
Op RF2, Coalition, Squad Leader
Op Tribulation, Squad Leader
Op Explosive Sunset, Platoon Leader
Op RF3, Coalition, Squad leader
Reply With Quote
  #8  
Old 09-13-2012, 06:16 AM
T20airsoftteam T20airsoftteam is offline
Registered User
 
Join Date: Apr 2012
Posts: 31
T20airsoftteam is a Private
iTrader: (0)
I'll trade you for an a&k mk43 mod 0
Reply With Quote
Reply

Tags
full metal, g3a3, rare, tokyo marui

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTS/WTT: Biohazard TM Leon Custom and TM Chrome Desert Eagle Hans17 Gas-Powered Weaponry 4 09-10-2011 08:02 AM
WTS: Custom TM P226 and Parts Xander Bolanos Gas-Powered Weaponry 0 04-19-2011 04:16 AM
AEG Mini-Guide RandomAdminGuy Newbie FAQ 0 01-04-2010 03:32 PM
WTS TM M3 Super 90 Custom Shotgun Sidd Spring-Powered Weaponry 1 12-02-2008 10:35 AM
AEG Mini-Guide, Prices, Gearbox Information, etc. Loki Newbie FAQ 2 04-21-2007 11:55 PM


All times are GMT -5. The time now is 03:12 AM.


Airsoft Guns, Tactical Gear, Military Gear, Ohio Airsoft Retailer

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 2005 - 2009 Airsoft Ohio