Airsoft Ohio Forums  
  #1  
Old 06-01-2013, 10:36 PM
hollowsnake's Avatar
hollowsnake hollowsnake is offline
Registered User
 
Join Date: Aug 2009
Posts: 26
hollowsnake is a Private
iTrader: (0)
KWA CQR Feeding issues, Metal lower install

Okay, so I just installed a Metal lower receiver onto my KWA CQR after the stock plastic one had cracked and snapped. Got the whole thing put back together and the thing won't feed. Tried the K120 that came with the gun and two different batches of MAG brand mags which fed okay before. A few points to make.
1: the hop up and barrel assembly was untouched before the test and was reinstalled properly, it worked in the gun before the install and I stripped it down after every use.
2: the lower receiver is a KWA lower for a 2GX.
3: The hop up is tight to the gearbox when the unit is put all together.

This is really frustrating and help would be appreciated
__________________
Don't make me get the Broomstick
Reply With Quote
  #2  
Old 06-01-2013, 10:51 PM
Naga's Avatar
Naga Naga is offline
New Member
 
Join Date: Jul 2006
Location: Worthington, OH
Posts: 394
Naga is a Private
Send a message via AIM to Naga
iTrader: (0)
Does pushing up on the bottom of the magazine while firing make it feed properly?
__________________
OSU Airsoft melee/cosplay freak - Team leader and support gunner of T.O.A.S.T.
Reply With Quote
  #3  
Old 06-02-2013, 11:09 AM
hollowsnake's Avatar
hollowsnake hollowsnake is offline
Registered User
 
Join Date: Aug 2009
Posts: 26
hollowsnake is a Private
iTrader: (0)
Turns out after taking the whole thing apart and putting it back together two more times it was the feed tube being slanted backwards toward the gearbox which was causing the feed problems. Four attempts to get things working.
__________________
Don't make me get the Broomstick
Reply With Quote
  #4  
Old 06-04-2013, 08:18 PM
AirsoftAquarium AirsoftAquarium is offline
Registered User
 
Join Date: Nov 2012
Posts: 7
AirsoftAquarium is a Private
iTrader: (0)
I have feeding problems with my KWA CQR anyways. if I do a long auto burst a bb will not fire and just roll out the barrel. this usually just happens when i use a 11.1 lipo but has happened with an 8.4 nicad.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTS: KWA Full Metal M4 with Halo Sight and more djm102193 Electric-Powered Weaponry 1 10-04-2010 05:13 PM
FS KWA M4, upgraded CA P90 and more to come! Pics are UP! koreaneric23 Electric-Powered Weaponry 2 04-08-2009 01:54 PM
KWA Magazine issues mw2010 Gas Guns 3 05-26-2008 06:42 PM


All times are GMT -5. The time now is 02:05 PM.


Airsoft Guns, Tactical Gear, Military Gear, Ohio Airsoft Retailer

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 2005 - 2009 Airsoft Ohio