vivalamexico
08-11-2009, 06:56 PM
I tried to get into airsoft I really did but something about paintball keeps my pistols shelved. So alas in order to complete some paintball related projects I have opted to off load my last remaining airsoft pistols.
First up is a KSC USP compact w/ Shooters design metal slide and barrel.
Pictures do not do the slide any justice this thing looks like the real deal with full trademarks to boot.
the GOOD:
Upgraded Hammer spring 330fps
Upgraded recoil spring to help bring the heavy slide back to battery more quickly
Shooters Design metal slide, rare and expensive and friggin awesome.
Metal barrel with trademarks as well
Shoots like an absolute dream
Comes with bagmaster holster and spare magazine.
the BAD:
Sometimes the slide sticks in the rearward position, this is due to the barrel chamber rubbing against the top inside of the slide. This rarely happens anymore though since Ive put more rounds through her.
The aforementioned rubbing has worn some of the ano from the top of the chamber, only visible when in full battery.
Small scratch in front of the front sight. My fault for slipping with a steel screwdriver while removing the sight for adjustment.
front sight adjusted poorly, it will shoot right if sights are lined up properly, its set with blue loctite can be boiled off and slid over and re loctited.
I lost the hop up adjuster, if I find it ill include it. otherwise im sorry. Plus the hopup is adjusted well as it stands.
pics are here:
http://i26.tinypic.com/rig6ir.jpg
http://i30.tinypic.com/2vtz98n.jpg
http://i29.tinypic.com/20uzhg2.jpg
http://i29.tinypic.com/v2s13l.jpg
http://i26.tinypic.com/52069.jpg
http://i31.tinypic.com/2lp5wy.jpg
http://i32.tinypic.com/15ygrc8.jpg
http://i32.tinypic.com/ke6a0w.jpg
http://i26.tinypic.com/qritjt.jpg
asking 175 or possible trades below.
Next up is a bone stock Tokyo Marui Tactical Master.
I heated and stretched the recoil spring to give a better positive lock after firing due to the fact that I was using it with propane. I have had zero issues with this gun and it shoots straight and true. Albeit a few stray marks on the slide and some orange barrel paint that didn't quite come off as expected.
Pics are here:
http://i30.tinypic.com/2zedxkz.jpg
http://i30.tinypic.com/2gudzyg.jpg
http://i25.tinypic.com/2cqi2pi.jpg
http://i32.tinypic.com/b7ety9.jpg
http://i30.tinypic.com/2vbmmnp.jpg
asking 70 or trades below.
Finally I have an all metal, nickel plated airsoft innovations propane adapter. This thing rocks, use propane in all your GBB's its just green gas and its cheaper. Put a drop of silicone shock oil in the hole and it lubes the gun and magazine seals in the process of filling.
Pics are here:
http://i25.tinypic.com/2z8agc6.jpg
http://i32.tinypic.com/vfv0pj.jpg
asking 20 or trades below. SOLD
prices are shipped.
Trades Im looking for are as follows in order of want:
Minimag reverse valve, or reverse x-valve if you are so inclined.
LVL10 kits
Classic RT foregrip, gas thru and the little drop thingy.
Docs mag to cocker adapter.
screw in type 45/4500 tank.
pre2k cocker bodies, RF/LF only no verts, no milling.
Old school Sniper 2's
Or we can negotiate straight cash if thats all you got.
Thanks in advance sorry for the immense post, I like to be thorough.
Airsoftohio.com don't be leery of my low post count I've been doing most of my trading and posting over on automags.org I have all positive feedback there and 100+ positive feedback on ebay under the name vivalamex
Ive been trying to offload my airsoft stuff on paintball forums because I was trying to get paintball stuff in a trade but no bites. a friend suggested ohio airsoft forums might be the place to go. Thanks in advance
First up is a KSC USP compact w/ Shooters design metal slide and barrel.
Pictures do not do the slide any justice this thing looks like the real deal with full trademarks to boot.
the GOOD:
Upgraded Hammer spring 330fps
Upgraded recoil spring to help bring the heavy slide back to battery more quickly
Shooters Design metal slide, rare and expensive and friggin awesome.
Metal barrel with trademarks as well
Shoots like an absolute dream
Comes with bagmaster holster and spare magazine.
the BAD:
Sometimes the slide sticks in the rearward position, this is due to the barrel chamber rubbing against the top inside of the slide. This rarely happens anymore though since Ive put more rounds through her.
The aforementioned rubbing has worn some of the ano from the top of the chamber, only visible when in full battery.
Small scratch in front of the front sight. My fault for slipping with a steel screwdriver while removing the sight for adjustment.
front sight adjusted poorly, it will shoot right if sights are lined up properly, its set with blue loctite can be boiled off and slid over and re loctited.
I lost the hop up adjuster, if I find it ill include it. otherwise im sorry. Plus the hopup is adjusted well as it stands.
pics are here:
http://i26.tinypic.com/rig6ir.jpg
http://i30.tinypic.com/2vtz98n.jpg
http://i29.tinypic.com/20uzhg2.jpg
http://i29.tinypic.com/v2s13l.jpg
http://i26.tinypic.com/52069.jpg
http://i31.tinypic.com/2lp5wy.jpg
http://i32.tinypic.com/15ygrc8.jpg
http://i32.tinypic.com/ke6a0w.jpg
http://i26.tinypic.com/qritjt.jpg
asking 175 or possible trades below.
Next up is a bone stock Tokyo Marui Tactical Master.
I heated and stretched the recoil spring to give a better positive lock after firing due to the fact that I was using it with propane. I have had zero issues with this gun and it shoots straight and true. Albeit a few stray marks on the slide and some orange barrel paint that didn't quite come off as expected.
Pics are here:
http://i30.tinypic.com/2zedxkz.jpg
http://i30.tinypic.com/2gudzyg.jpg
http://i25.tinypic.com/2cqi2pi.jpg
http://i32.tinypic.com/b7ety9.jpg
http://i30.tinypic.com/2vbmmnp.jpg
asking 70 or trades below.
Finally I have an all metal, nickel plated airsoft innovations propane adapter. This thing rocks, use propane in all your GBB's its just green gas and its cheaper. Put a drop of silicone shock oil in the hole and it lubes the gun and magazine seals in the process of filling.
Pics are here:
http://i25.tinypic.com/2z8agc6.jpg
http://i32.tinypic.com/vfv0pj.jpg
asking 20 or trades below. SOLD
prices are shipped.
Trades Im looking for are as follows in order of want:
Minimag reverse valve, or reverse x-valve if you are so inclined.
LVL10 kits
Classic RT foregrip, gas thru and the little drop thingy.
Docs mag to cocker adapter.
screw in type 45/4500 tank.
pre2k cocker bodies, RF/LF only no verts, no milling.
Old school Sniper 2's
Or we can negotiate straight cash if thats all you got.
Thanks in advance sorry for the immense post, I like to be thorough.
Airsoftohio.com don't be leery of my low post count I've been doing most of my trading and posting over on automags.org I have all positive feedback there and 100+ positive feedback on ebay under the name vivalamex
Ive been trying to offload my airsoft stuff on paintball forums because I was trying to get paintball stuff in a trade but no bites. a friend suggested ohio airsoft forums might be the place to go. Thanks in advance