KWA G17 problem

[MajMcMuffins]

At the last Walsh Farms event i went to go use it and I experienced a complete stop in the trigger. I took the mag out and the slide off and tried to pull the trigger. I noticed the part suspoused (sp?) to release the hammer can not release the hammer, but if I use a allen wrench i can push the part to release the hammer.

Any help would be greatly appreciated.

EDIT: I can take pictures if asked for some.

[Texx]

Sounds like you may have damaged the trigger release bar or lost the spring. I haven't worked on a 17/34 in a while, but replacement parts would have to come from a used gun or buy one from overseas. Just a heads up, the 17/34 are identical lowers so you might have an easier time looking for a parts gun from either of those. Good luck.

Note: G18, 26, 19, and 23F parts are normally not compatible, but some of the springs may be.

[J_Bauer]

you can buy replacement parts for it at www.kwausa.com. when you get to the page, click on "Pro Shop"

[MajMcMuffins]

Thanks a bunch guys. I will try to take it apart to see the exact casue.