ak 47 wood kit

[shakingdubaby]

im going to need help with my ak-47s. im going to buy the wood kit for the gun and i have no idea how to the front grips off. the manual is no help. its all japanese. i will be soo hapy if someone can help at all.

[Fox]

Its real simple. Under the front site (Under the fake cleaning rod that you have to take out) there will be a screw, I beleive a small philips head. Remove that.

Then on the 'Y' that holds the upper part of the grip to the barrel/lower part there will be another small screw, take that out, and slide it forward, both grips should come off (Lower and upper) And thats all you'll need I beleive for just the wood kit (My RPK Kit came with a whole bunch of other metal peices to move the sling and such...)

For the pistol grip, its real simple since the motor has a little motor fram around it, though getting the screw in is a real B*tch some times (at least on my RPK kit... it has a semi-extended pistol grip) since the screw it too short. You just take the screw out (Standard Drive I beleive i lost my orignal) pop the grip off, and put the new one on, put the screw back in.

Please note, On the lower foregrip, the wood grip will be a bit of a pain getting on the first time, you might have to lightly tap it in with a hammer, or force it in with your hand. The wood isnt finished all the way, so its a bit rough.


Any more questions/Comments, Please fell free to 'PM' me.

[shakingdubaby]

thank you so much. seriously. iv been looking all over the net for this info and i new i would just find it here. that was a big help. and im very happy