TRDrew
07-03-2008, 07:01 PM
SOLD
First off, this is an Echo 1 MP5 CQC AEG. I bought this gun from AA in Milford less then a week ago. It was quite frankly an impulse buy, and I now realize that I don't want to get into modding and shooting a third gun.
It is a pretty good gun and shoots well for an MP5. I'm used to longer barreled guns, so..
I have shot only about 2 1/2 highcaps worth of bb's in my backyard. I have also decided that MP5s arn't my thing.
It is shooting to the left a bit, but it is doing it consistently. When I first got the gun, the hop-up was also over-adjusted even while on the lowest setting. So I opened the gun and cut down the piece that pushes on the n u b. It works fine now. I also looked to see if the bucking was damaged, but it and the n u b were seated correctly and fine. One hi-cap and a few standards were shot after assembly with no adverse issues.
The gun comes with the following:
- Wall Charger
- 8.4v (1100 iirc) stick type battery
- 1 hi-cap mag
- 1 shorty standard mag, with loader
- Collapsable M4 style stock
- Back plate (if you wish to remove the stock)
- Some BBs that came with it, 2 allen wrenches, and extra bolts.
- Original box and booklet.
- Ram-rod
I'm asking 135 shipped obo. This gun is essentially new, and can be upgraded using TM standard parts.
I prefer Paypal.
If you want to pick up and pay cash, I can do that too.
May consider partial trades for CA M15 and M14 parts and accessories. Just let me know what you have.
Pics:
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000135.jpg
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000137.jpg
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000136.jpg
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000139.jpg
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000140.jpg
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000141.jpg
More pics upon request.
This is the same gun package on AA's website:
http://www.airsoftarms.com/view_product.php?ProductID=8639&product_name=Echo+1%2C+MP5+CQC+Electric+Airsoft+Gu n
First off, this is an Echo 1 MP5 CQC AEG. I bought this gun from AA in Milford less then a week ago. It was quite frankly an impulse buy, and I now realize that I don't want to get into modding and shooting a third gun.
It is a pretty good gun and shoots well for an MP5. I'm used to longer barreled guns, so..
I have shot only about 2 1/2 highcaps worth of bb's in my backyard. I have also decided that MP5s arn't my thing.
It is shooting to the left a bit, but it is doing it consistently. When I first got the gun, the hop-up was also over-adjusted even while on the lowest setting. So I opened the gun and cut down the piece that pushes on the n u b. It works fine now. I also looked to see if the bucking was damaged, but it and the n u b were seated correctly and fine. One hi-cap and a few standards were shot after assembly with no adverse issues.
The gun comes with the following:
- Wall Charger
- 8.4v (1100 iirc) stick type battery
- 1 hi-cap mag
- 1 shorty standard mag, with loader
- Collapsable M4 style stock
- Back plate (if you wish to remove the stock)
- Some BBs that came with it, 2 allen wrenches, and extra bolts.
- Original box and booklet.
- Ram-rod
I'm asking 135 shipped obo. This gun is essentially new, and can be upgraded using TM standard parts.
I prefer Paypal.
If you want to pick up and pay cash, I can do that too.
May consider partial trades for CA M15 and M14 parts and accessories. Just let me know what you have.
Pics:
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000135.jpg
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000137.jpg
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000136.jpg
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000139.jpg
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000140.jpg
http://i20.photobucket.com/albums/b250/fuel_sipping/S5000141.jpg
More pics upon request.
This is the same gun package on AA's website:
http://www.airsoftarms.com/view_product.php?ProductID=8639&product_name=Echo+1%2C+MP5+CQC+Electric+Airsoft+Gu n